- 01780 437222
- enquiries@waltherstrongandco.com
- Mon - Fri: 08:00 - 17:00
![ISO-Acoustic Tape - 90MM x 25M [4MM THICK] - Image 3](https://waltherstrong.com/wp-content/uploads/2024/02/Shot-2-1.jpg)
![ISO-Acoustic Tape - 90MM x 25M [4MM THICK] - Image 4](https://waltherstrong.com/wp-content/uploads/2024/02/Image-2-3.jpg)
![ISO-Acoustic Tape - 90MM x 25M [4MM THICK] - Image 5](https://waltherstrong.com/wp-content/uploads/2024/02/Actual-shot-6.jpg)
£31.99 exc VAT (£38.39 inc. VAT)
Available Sizes: 30mm x 25m | 50mm x 25m | 70mm x 25m | 90mm x 25m
For box quantities, bulk order discounts, or international shipping inquiries, please call us on 01780 437222 or email enquiries@waltherstrongandco.com
DELIVERY NEXT WORKING DAY IF ORDERED BEFORE 3PM
Need it now? Click HERE to find your local merchant!
158 in stock (can be backordered)
Any questions before ordering? Enquire about this product using the button below
Walther Strong ISO-Acoustic Tape is a self-adhesive sound isolation tape designed to reduce noise transfer and vibration through wall and floor systems. Perfect for loft conversions, garden rooms, music studios, and general construction, it helps meet Building Regulations Part E by minimising flanking sound across structures and party walls.
This specialist sound insulation tape adheres firmly to timber, steel stud, and zinc joists, delivering long-lasting acoustic performance in residential and commercial builds. It’s been fully trialled and tested for reliability.
Important Note:
Not suitable for high-pressure or heavy-load areas. For those installations, use Walther Strong HD ISO-Acoustic Tape for enhanced durability and strength.
| Key Feature | |
|---|---|
| Use Case |
“Cheaper and better quality than the stuff on Amazon. The adhesive is excellent and it worked a treat on the 100 year old suspended timber floor I used it on.”
HOW TO APPLY –
1 – Prepare Surface [remove all debris & dust]
2 – Apply Tape [apply evenly to the top of each joist]
3 – Press Firmly [apply firm pressure along tape]
4 – If Joists Are Wet [Staple tape down & as the joists dry the adhesive will bond]
5- Don’t Over-Tighten Screws [Don’t counter sink screw heads]
We recommend that you check the roll prior to install ensuring no significant damage has been applied through haulage.
Sound waves bounce off surfaces and can interfere with your ability to record music. Luckily, acoustic tape can minimise this and make a room less echoey. To hang Walther Strong acoustic tape, you’ll want to find the optimal area on the wall to place the panels. Then, you’ll take measurements and adhere them to the wall with the tape strips. If you follow the proper steps, you can effectively install acoustic tape without damaging the wall that you’re applying it to.
Installation couldn’t be more straightforward. Just remove the adhesive backing strip and place the tape firmly on your chosen batten or joist. Make sure it covers the whole area so the tape can do its job. Now you’re ready to add your acoustic plasterboard or floorboards.
Easy to overlap and intertwine should the build require it.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.