Individual post covering lengths
|8×8 square post||Requires a 860mm/86cm strip|
|7×7 square post||Requires a 760mm/76cm strip|
|6×6 square post||Requires a 660mm/66cm strip|
|5×5 square post||Requires a 550mm/55cm strip|
|4×4 square post||Requires a 450mm/45cm strip|
|6” round post||Requires a 520mm/52cm strip|
|4” round post||Requires a 350mm/35cm strip|
|2” round post||Requires a 200mm/20cm strip|
Our Post Tape completely seals protects wooden fence posts at the ground-line section, protecting from moisture, oxygen, fungi, and rot, increasing the lifespan of the post.
SOLVING PROBLEMS – Post Protection
Exposure to the elements outdoors can result in significant post weathering. The most common area for this damage to occur is up to 100mm below the surface. Our Post Tape will give you a 25 year guaranteed life to your fence posts. Protect your posts with Walther Strong PosTTape®.
BENEFITS OF USING POSTTAPE®
- Completely UV-Stable
- Quick and easy installation
- Permanent adhesive bond for 50 years
- Self-seals around fasteners
- Can apply to damp timber or below freezing
- Does not require any other tools to apply
- Upgraded sustainable materials – we are now using sustainable materials in PosTTape. The flat fibre strand laminated webbing layers are manufactured from self-reinforced thermo polymers which gradually increase in strength over time and are 100% recycled!
WHAT IS POSTTAPE®?
PosTTape® is a non-butyl self-sealing tape manufactured from a massively strong polymer acrylic adhesive, which gives a completely waterproof and weatherproof seal.
With a permanent adhesive bond for 50 years and a 25-year guarantee, this greatly adds to the life of your fence posts. It is tested with all timber treatments.
To watch why POST protection is important click here
WHY WALTHER STRONG POSTTAPE®?
PosTTape® is a non-butyl tape.
Non-Butyl tapes are particularly suitable for this application as they are completely UV stable and keep their integrity for longer. This means that they have many advantages over both butyl and asphalt tapes.
In addition to this, it is stable from -40C to +93C with no cracking, peeling or strength loss.
WHERE IS POSTTAPE® APPLIED?
Wrap PostTape® around timber posts to create a waterproof and moisture-tight seal. Make sure it is completely covers the post at least 50mm above and below the surface. Once applied the post can be set instantly – no curing time is required.
HOW MUCH POSTTAPE® DO I NEED?
To watch how to apply POSTTape® click here
To watch a video on the technical information & tips on POSTTape® click here