Description
Paint on single-component water sealant – Tested according to DIN 18195 – Brilliant For repairing and installing roofing areas & waterproofing wet rooms –
Hydro-Stop Benefits:
- Highly flexible single component sealant
- UV-weather & ageing resistant
- Can be used on damp mineral surfaces (concrete etc)
- Water-proofs roofing areas & wet rooms
- Foundation waterproof wall sealing acc. to DIN 18195
- Available in 1KG & 7KG
How to Apply Hydro-Stop :
Beko Hydro-Stop is pourable and is easy to spread with a roller or paint brush. For large areas a roller is recommended, small repair jobs can be handled with a paint brush or spatula. Ensure the surface is free from dust, grease, dirt, cracks or mould. Ensure the surface is dry.
Apply in 2 coats (the second coat can be applied after approx. 4 hours). For a stronger adhesion on gaps a reinforcement fleece is recommended. Beko Hydro-Stop is not suitable for structural joints. After Beko Hydro-Stop has been applied, it should be protected against contact with water during the curing process. The surfaces should have a residual moisture < 7% before applying.
Estimated usage per coat – 1 Kg per / metre squared ( when applied with 2MM thickness )
Click here to download the safety data sheet
simple application steps :
Step 1 – Apply 1st coat of hydro-stop – layer approx. 2MM thick
Step 2 – Let 1st coat fully dry / cure (approx. 4 hours)
Step 3 – Apply 2nd coat of hydro-stop – layer approx. 2MM thick
Step 4 – If using as tile adhesive – set tiles into sealant before 2nd coating fully cures
Step 5 – Let fully cure for 24 hours before coming in contact with moisture